Jordan Brown
Senior Full-Stack Engineer

Printable parts, assemblies, and experiments.

Some product links on this page may be affiliate links.

Materials I like

PETG (SUNLU bulk 5KG) PLA Matte (eSun 1KG) PETG (SUNLU white 5KG) SUNLU PLA+ 2.0 (5kg) SUNLU PLA PLUS (5kg)

Skadis Peg Base Hook

Hook designed as a base for building your own Skadis-mountable parts.

PETG PLA+
Preview
Notes
  • When modelling small hooks/mounts, extruding from the front face can be enough. The Skadis Coat Hook is an example of this.
  • For larger objects, extrude and use the full width of the outer hook flush with the Skadis board.
  • For tall, wide, or heavy objects, arrange multiple hooks 40mm apart center-to-center (CAD linear patterns help). The Skadis Caliper Mount is a good example of this.
Print settings
Nozzle
0.4mm
Walls
2
Infill
gyroid
Supports
no
Tested materials
PLA, PETG
Downloads
STL STEP GLB 3MF
License
Anything Goes License

Use it for anything, including commercial use, with no attribution required.

View license

Skadis Caliper Mount

Mount for my Shahe digital caliper. Should work with most calipers of a similar profile.

PETG PLA+
Preview
Notes
  • Uses the Skadis Peg Base Hook for IKEA Skadis mounting.
  • Designed around the Shahe IP54 digital caliper; should work with most calipers of a similar profile.
  • Mounting is easiest with the caliper opened slightly so it can slide into place.
Print settings
Nozzle
0.4mm
Walls
2
Infill
gyroid
Supports
some
Tested materials
PETG
Downloads
STL STEP GLB 3MF
License
Commercial Use Requires Significant Alterations License

Non-commercial use is allowed. You may sell only significantly altered versions.

View license

Skadis Coat Hook

Coat hook for IKEA Skadis, suitable for small hanging loops.

PETG
Preview
Notes
Print settings
Nozzle
0.4mm
Walls
2-3
Infill
gyroid
Supports
no
Tested materials
PLA+
Downloads
STL STEP GLB 3MF
License
Commercial Use Requires Significant Alterations License

Non-commercial use is allowed. You may sell only significantly altered versions.

View license

Skadis Scarf Hook

Hook for scarfs with gentle angles to avoid tugging or pulling threads.

PETG PLA+
Preview
Notes
Print settings
Nozzle
0.4mm
Walls
2-4
Infill
gyroid
Supports
no
Tested materials
PLA Matte
Downloads
STL STEP GLB 3MF
License
Commercial Use Requires Significant Alterations License

Non-commercial use is allowed. You may sell only significantly altered versions.

View license

Skadis Offset Switch Mount

Right-side mount for a clicky heavy-duty rocker switch to control Skadis-mounted LED strips.

PETG
Preview
Notes
  • Intended to mount on the right-hand side of the Skadis board.
  • Fits a heavy-duty rocker toggle switch like this one.
  • Uses the Skadis Peg Base Hook for IKEA Skadis mounting.
Print settings
Nozzle
0.4mm
Walls
2
Infill
gyroid
Supports
no
Tested materials
PETG
Downloads
STL STEP GLB 3MF
License
Commercial Use Requires Significant Alterations License

Non-commercial use is allowed. You may sell only significantly altered versions.

View license

Thread Bobbin

Bobbin for yarn/thread, replicating common injection-moulded bobbins for replacing broken ones or printing small batches.

PLA PETG
Preview
Notes
  • Depending on material, printed versions can end up slightly stiffer than the originals.
Print settings
Nozzle
0.4mm
Walls
2
Infill
gyroid
Supports
no
Tested materials
PLA
Downloads
STL STEP GLB 3MF
License
Anything Goes License

Use it for anything, including commercial use, with no attribution required.

View license