Tapo C325WB Window-Flush Housing

Window-flush housing for the Tapo C325WB camera. If you use the camera up against a window like I do, this gives you something to place flush with a window to avoid glare from light in the room behind the camera.

PLA+

Tapo C325WB Window-Flush Housing photo 1

Tapo C325WB Window-Flush Housing photo 2

Tapo C325WB Window-Flush Housing photo 3

Preview

Notes

Assembly instructions: Use your Tapo C325WB behind a window.
Additional hardware required: superglue, 4pcs 3.5x10 self-tapping screws (pan head recommended), 3pcs 3x10 screws (pan head recommended), 3pcs M3 nut
Prints as 3 parts, requires some assembly.
Recommended to print in black - helps avoid glare from behind the camera for a much clearer image through a window, particularly at night.

Print settings

Nozzle: 0.8mm
Walls: 3
Infill: gyroid
Supports: no
Tested materials: PLA+

Downloads

STL STEP GLB 3MF

License

Commercial Use Requires Significant Alterations License

Non-commercial use is allowed. You may sell only significantly altered versions.

View license